Home - Return to Previous Page
FLEECE 2013-2016 2nd Gen Swap Kit (No Turbo)
FLC1316SK
This kit is referred to as a 2nd Gen swap becuase the turbo location is moved from its factory location to the same location as the factory location of a 2nd Generation Dodge/Cummins pickup. In other words, the swap locates the turbo in the center of the manifold with the outlet flange angled down. The major benefit for Common Rail trucks is the use of a divided manifold. Capitalizing on the individual cylinder impulses in a divided manifold greatly increases spool up and driving characteristics with a properly matched turbo.
Fleece Performance 2nd Swap Kits come as complete as a kit can come. This level of work on any truck should be done by a competent technician or capable mechanic.
This kit is designed to be used with an S400 turbocharger with a 5" compressor cover inlet, 4.2" OD compressor cover discharge, 4.625" OD turbine housing discharge, and T4 turbine housing foot. It is also designed to be used with a 2nd Gen T4 Steed Speed or ATS Cast Manifold with the outlet flange angled down.
Kit Contents Include:
T4 Divided Turbine Flange Gasket
Short Stud Kit
2003+ Cummins Turbo Oil Feed Line Kit for S300 and S400 Turbos in 2nd Gen Location
Cummins Turbo Drain Tube Adapter
-10 to 7/8"-14 Straight Male Black w/ O-Ring (FPE-78-14-10AN)
Turbo Drain Flange Adapter (7/8-14 o-ring)
(2) 3/8"-16x1" Flange Head Bolt
(2) M10-1.5x25mm Flange Head Bolt
(2) M8 × 1.25 Flange Head for Turbo Drain Kits
-10 Braided Steel Cummins Turbo Drain Tube
16MM Metric Port Plug Allen Head (Cummins Coolant Bypass Plug for Automatic Kits)
18MM Metric Port Plug Allen Head
Rubber Elbow 5" ID X 45 Degree
Intake Elbow with MAF/IAT Bung (Molded)
Fleece Performance Custom Air Filter for 2nd Gen Kit
(2) Breeze T-Bolt Clamp 3.00" w/ Plate Bolt
(2) Breeze T-Bolt Clamp 5.25" w/ Plate Bolt
Flat-V Flanged 2nd Gen Downpipe with Clamps
2013-2016 Cummins 2nd Gen Kit CAC Pipe
2003+ Cummins Exhaust Manifold Gasket Set
S400 VBand Compressor Outlet Clamp
O-ring for 90° Turbo Compressor Discharge Adapter
(4) Breeze Mini Hose Clamp SAE 8 w/ Plated Hex Screw
4ft 5/8" Heater Hose
2ft 3/4" Thermasheild
Tee Connector - 5/8" (15.9 mm)
Cummins 68RFE Transmission Dipstick Tube Bracket
4th Gen Cummins Coolant Riser Delete (-10AN)
-10 90deg to Hose Barb Black
2013-2016 6.7L Cummins A/C Line Reroute Kit
Kits can be sold with or without a Coolant Tank, standard T4 Steed Speed Manifold or Cast Manifold.
Fleece Performance 2nd Swap Kits come as complete as a kit can come. This level of work on any truck should be done by a competent technician or capable mechanic.
This kit is designed to be used with an S400 turbocharger with a 5" compressor cover inlet, 4.2" OD compressor cover discharge, 4.625" OD turbine housing discharge, and T4 turbine housing foot. It is also designed to be used with a 2nd Gen T4 Steed Speed or ATS Cast Manifold with the outlet flange angled down.
Kit Contents Include:
T4 Divided Turbine Flange Gasket
Short Stud Kit
2003+ Cummins Turbo Oil Feed Line Kit for S300 and S400 Turbos in 2nd Gen Location
Cummins Turbo Drain Tube Adapter
-10 to 7/8"-14 Straight Male Black w/ O-Ring (FPE-78-14-10AN)
Turbo Drain Flange Adapter (7/8-14 o-ring)
(2) 3/8"-16x1" Flange Head Bolt
(2) M10-1.5x25mm Flange Head Bolt
(2) M8 × 1.25 Flange Head for Turbo Drain Kits
-10 Braided Steel Cummins Turbo Drain Tube
16MM Metric Port Plug Allen Head (Cummins Coolant Bypass Plug for Automatic Kits)
18MM Metric Port Plug Allen Head
Rubber Elbow 5" ID X 45 Degree
Intake Elbow with MAF/IAT Bung (Molded)
Fleece Performance Custom Air Filter for 2nd Gen Kit
(2) Breeze T-Bolt Clamp 3.00" w/ Plate Bolt
(2) Breeze T-Bolt Clamp 5.25" w/ Plate Bolt
Flat-V Flanged 2nd Gen Downpipe with Clamps
2013-2016 Cummins 2nd Gen Kit CAC Pipe
2003+ Cummins Exhaust Manifold Gasket Set
S400 VBand Compressor Outlet Clamp
O-ring for 90° Turbo Compressor Discharge Adapter
(4) Breeze Mini Hose Clamp SAE 8 w/ Plated Hex Screw
4ft 5/8" Heater Hose
2ft 3/4" Thermasheild
Tee Connector - 5/8" (15.9 mm)
Cummins 68RFE Transmission Dipstick Tube Bracket
4th Gen Cummins Coolant Riser Delete (-10AN)
-10 90deg to Hose Barb Black
2013-2016 6.7L Cummins A/C Line Reroute Kit
Kits can be sold with or without a Coolant Tank, standard T4 Steed Speed Manifold or Cast Manifold.
Pricing:
$1,836.00
Details
- FLC1316SK
- FLC1316SK
- Fleece
- New
Shipping Information
- Item Requires Shipping
- 0.1 lbs.
- W0.1000” x H0.1000” x L0.1000”
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
- The Husker Diesel Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Free Shipping On any orders over $50
- No Hassle ReturnsEasy returns or refunds
Write the First Review!